It can be used in virtually any educational setting - from four-year engineering schools to community colleges and voc/tech schools to industrial training centers - and will also serve as a reliable reference for on-the-job use or as a self-study manual. Hint: If you have paid attention to things in your book and experimented with copying toolpaths into other toolpath groups and deleting chains and rechaining.you will have no problem completing this exercise in just a few minutes.This unique text presents a thorough introduction to Mastercam X7 Mill for students with little or no prior experience. You need to know what the product looks like before you set a plan into place to machine it. This exam is all about visualizing WHAT you want to remove as material to create your finished product. Remember, we did this on the Smile/Frown project. This is ONE file, with multiple part toolpaths.
Under each toolpath group, you will choose your toolpaths (face, contour, pocket, drill, etc.) in order to machine the product.ĩ. You will create a Toolpath Group for each product and name them Product 1, Product 2 and so on.Ĩ. Your raw material choice should be Plastic-ABS.ħ. (You will have a facemill depth of " for each toolpath group.)Ħ. Your tools will be Tool #1 = 0.5" or 0.75" flat endmill, Tool #3 = 0.25" and Tool #5 = a face mill. You now need to choose the Mill Default machine, set your stock (length and width) and the thickness will be 0.75".ĥ. Bonus: If you can come up with a 6th product, you will receive bonus points.Ĥ. All geometry must be used therefore you can't just face the top off and say it is one product and You CAN NOT ADD geometry.ģ. Now, come up with a minimum of 5 different products that you machine from that 2D geometry and quickly sketch them so you visualize what they will look like. (This way you can see what you are working with)Ģ. Take out a sheet of paper and sketch the 2D geometry from the Top View. It is basic 2D geometry that will need a few things created to make it functional.ġ. You will download the provided file and add to the name, your own name.
0 kommentar(er)
